80
SeCtion b
SoFtware Manual
RetuRn to toC
MaCe HydRoMaCe 3000
Product Manual
81
RetuRn to toC
23.3 Ordering the SDI-12 or aSCII Output String
The number and order of channel values in the output string for SDI-12 or
RS232, ASCII output can be configured using Flocom
+
.
1.
From the “FloSI settings” dialogue box, move the required channels from
the “
Available channels
” table to the “
Output channels
” table by highlighting
the desired channel in the “
Available channels
” table and clicking the
right
arrow
. If a channel in the “
Output channels
” table is no longer required,
highlighting it and clicking the
left arrow
will remove it from the “
Output
channels
” table. The position of a channel in the “
Output channels
” table can
be changed by highlighting the channel and clicking the
up
or
down arrow.
the user must ensure that there are no two devices with the same
address on the same bus. In such a case, the behaviour of the bus is
unpredictable
Available
channels
Address
Output
channels
24.0 real time data
From the main menu click
“Real time data”
and the following menu options
will appear as listed below:
Measure and display
1.
Click
“Measure and display”
then
“Start”
to observe the current channel
values.
2.
Click
“Stop”
then
”Close”
to return to the main menu.
