Mace HydroMace 3000 Product Manual Download Page 36

Page: 36 / 50

SeCtion b

SoFtware Manual

RetuRn to toC

MaCe HydRoMaCe 3000

Product Manual

RetuRn to toC

Channel name

This is the name given to the channel by the user when setup.

NOte: this name will also show on the hM 3000 LCD screen if the

Display channel check box is ticked

Decimal places

The user can set the number of decimal places (0, 1, 2, 3) using the drop down

list box. These decimal places will be shown in both the data file and the LCD.

Display channel

If this check box is ticked then this channel will be displayed on the HM 3000

LCD.

Log channel

If this check box is ticked then this channel will be logged in the data file.

Weir type

The weir type selected when the channel was added.

Depth channel

The depth channel selected for the weir calculation when the channel was

added.

Flowrate units

Select the units and the timebase from the drop down list boxes. This sets the

units on the logged value.

Flume width

Enter the width of the weir

in the units shown.

The units are defined according

to the

“System settings”

21.3.5 Edit a “Flowrate (Weir)” channel type

Display channel

Channel name

Log channel

Decimal places

Depth channel

Weir type

Flowrate units
Flume width

21.3.5.1 Flowrate (Weir): Rectangular and Cipoletti weirs

Channel name

This is the name given to the channel by the user when setup.

NOte: this name will also show on the hM 3000 LCD screen if the

Display channel check box is ticked

Decimal places

The user can set the number of decimal places (0, 1, 2, 3) using the drop down

list box. These decimal places will be shown in both the data file and the LCD.

Display channel

If this check box is ticked then this channel will be displayed on the HM 3000

LCD.

Log channel

If this check box is ticked then this channel will be logged in the data file.

Weir type

The weir type selected when the channel was added.

Depth channel

The depth channel selected for the weir calculation when the channel was

added.

Flowrate units

Select the units and the timebase from the drop down list boxes. This sets the

units on the logged value.

Display channel

Channel name

Log channel

Decimal places

Depth channel

Weir type

Flowrate units

21.3.5.2 Flowrate (Weir): V-Notch weirs (30˚, 45˚, 60˚, 90˚)

Summary of Contents for HydroMace 3000



















































Search results

Summary of Contents for HydroMace 3000

Reviews:

Related manuals for HydroMace 3000

Brands by name

Popular brands

Mace HydroMace 3000, Product Manual

Search results

Summary of Contents for HydroMace 3000

Reviews:

Related manuals for HydroMace 3000

Brands by name

Popular brands