MacDon TM100, Manual

Page: 72 / 198

262150
58
Revision A
1034866
A
B
C
D
Figure 4.29: Multicoupler
8. Locate the multicoupler in the parts bag. This multicoupler
is required to connect the reel pressure/return and header
lift hoses to the float module.
9. Connect the appropriate hoses to the multicoupler as
follows:
•
Reel return (A) (yellow tie)
•
Reel pressure (B) (white tie)
•
Header lift (C) and (D) (no ties)
1034870
A
B
C
Figure 4.30: Multicoupler Receptacle
10. Open the cover on receptacle (A) located on the left side of
the float module.
11. Press lock button (B) and pull handle (C) to the fully-open
position.
12. Clean the receptacle mating surfaces.
1034869
A
Figure 4.31: Multicoupler Connected to TM100
13. Position multicoupler (A) onto the receptacle and push the
handle to engage the multicoupler pins into the receptacle.
14. Push the handle to the closed position until the lock button
snaps out.
ATTACHING AND DETACHING TRACTOR MOUNT FLOAT MODULE