MacDon TM100, Manual

Page: 27 / 198

262150
13
Revision A
1031138
Figure 1.20: MD #313728
MD #313728
General hazard pertaining to machine operation and servicing /
Hot fluid spray hazard
DANGER
To prevent injury or death from improper or unsafe machine
operation:
•
Read the operator
’
s manual and follow all safety
instructions. If you do not have a manual, obtain one from
your Dealer.
•
Do NOT allow untrained persons to operate the machine.
•
Review safety instructions with all Operators every year.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of the machine before
starting the engine and during operation.
•
Keep riders off of the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage the header drive, put the transmission in Neutral,
and wait for all movement to stop before leaving the
operator
’
s position.
•
Stop the engine and remove the key from the ignition
before servicing, adjusting, lubricating, cleaning, or
unplugging the machine.
•
Engage safety locks to prevent the lowering of a raised unit
before servicing it in the raised position.
•
Use a slow moving vehicle emblem and flashing warning
lights when operating on roadways unless prohibited by law.
CAUTION
To prevent injury from hot fluids:
•
Do NOT remove the fluid fill cap when the machine is hot.
•
Allow the machine to cool down before opening the fluid
fill cap.
•
Fluid is under pressure and may be hot.
SAFETY