5. Using a 34 mm socket wrench, remove nut (A) and
washer (B) from spindle.
Figure 5.43: Cutterbar Spindle
6. Install four M12 mm x 60 mm long bolts (A) into holes
in plate (B).
7. Use bolts (A) as jacking screws to remove plate (B)
from gear. Remove bolts from plate.
Figure 5.44: Cutterbar Spindle
8. Pry out failed key (A) from gear (B) and plate.
9. Thoroughly clean metal debris from disassembled
components and cutterbar.
Figure 5.45: Cutterbar Spindle Gear
147757
133
Revision B
Summary of Contents for R85
