![background image](http://html1.mh-extra.com/html/macdon/r85/r85_assembly-instructions-manual_685794097.webp)
214367
89
Revision A
4.5.2
Checking Conditioner Roll Timing
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator
’
s seat for any reason.
1.
Lower the header fully to the ground.
2.
Shut down the engine and remove the key.
1006111
A
B
Figure 4.17: Roll Timing
A - Timing Gap
B - Crop
3.
Header should be on the ground and windrower should
be shut down. Ensure key is removed from ignition.
4.
Open driveshield. For instructions, refer to
1009337
A
B
Figure 4.18: Roll Timing Gauge in Storage
Position
5.
Remove bolt (A) and nut, and remove gauge (B) from
flanged frame member.