214497
14
Revision D
3.3.2
Removing Driveline on an R116
–
Small Driven Drums
To remove the vertical driveline from an R116 with small driven drums, follow these steps:
If you are working on an R113 or an R116 with large driven drums, refer to
3.3.1 Removing Driveline on an R113
.
NOTE:
Retain all parts for reassembly unless otherwise stated.
1024929
A
B
A
A
A
Figure 3.17: Driven Drum
1.
On the left side of the cutterbar, remove four M10 hex
flange head bolts (A) and remove vertical driveshield (B).
1024659
A
B
B
Figure 3.18: Driveline Shield
2.
Remove two M10 hex flange head bolts (B) and cover
plate (A).
1024925
A
B
C
Figure 3.19: Driveline Shield
3.
Remove four M10 hex flange head bolts (A), top plate (B),
and drum top (C).
