262171
430
Revision A
1034229
A
B
Figure 6.242: Caster Wheel Assembly
5.
Using a suitable lifting device capable of lifting 2268 kg
(5000 lb.) minimum, raise the end of walking beam (A) until
caster wheel assembly (B) is slightly off the ground.
CAUTION
Jack stand must be capable of supporting a minimum of
2268 kg (5000 lb.).
6.
Place a jack stand beneath the walking beam and lower the
beam until it is supported on the stand.
Lowering Caster Wheel
This procedure describes how to lower the caster wheel.
1034229
A
B
Figure 6.243: Caster Wheel Assembly
1.
Using a suitable lifting device capable of lifting minimum
2268 kg (5000 lb.), raise the end of walking beam (A)
slightly.
2.
Remove the jack stand, and lower the end of the walking
beam until caster wheel (B) is on the ground.
3.
Remove the blocks from the drive wheels.