262171
280
Revision A
Lubricant/Fluid
Location
Description
Capacity
Diesel fuel
Fuel tank
Ultra low sulphur diesel (ULSD) Grade No. 2, or
ULSD Grade No. 1 and 2 mix
15
; refer to
for more information
518 liters
(137 U.S. gallons)
Hydraulic oil
Hydraulic reservoir
Single grade transmission/hydraulic fluid (THF)
Viscosity at 60.1 cSt @ 40°C
Viscosity at 9.5 cSt @ 100°C
60 liters
(15.8 U.S. gallons)
16
Gearbox lubricant
Gearbox
SAE 75W-140 or 80W-140, API service class GL-5
fully synthetic gear lubricant (SAE J2360
preferred)
2.1 liters
(2.2 U.S. quarts)
Gearbox lubricant
Standard wheel drive
SAE 75W-140 or 80W-140, API service class GL-5
fully synthetic gear lubricant (SAE J2360
preferred)
1.4 liters
(1.5 U.S. quarts)
Engine coolant
Engine cooling
system
ASTM D-6210 and CES-14603, Peak Final Charge
Global
™
or Fleetguard ES Compleat
™
OAT. Refer
to
6.1.4 Coolant Specifications, page 281
for
more information
30 liters
(7.92 U.S. gallons)
Engine oil
Engine oil pan
SAE 15W-40 compliant with SAE specs for API
Class SJ and CJ-4 engine oil
11 liters
(11.6 U.S. quarts)
Air conditioning
refrigerant
Air conditioning
system
R134A
2.38 kg
(5.25 lb.)
Air conditioning
refrigerant oil
Air conditioning
system total capacity
PAG SP-15
240 cc
(8.1 fl. oz.)
Windshield
washer fluid
Windshield washer
fluid tank
SAE J942 compliant
4 liters
(1 U.S. gallon)
6.1.3
Fuel Specifications
Follow the specifications for fuel quality to optimize system performance and prevent damage to the engine or fuel
components.
Use only ultra low sulphur diesel (ULSD) from a reputable supplier. For most year-round service, No. 2 ULSD fuel meeting
ASTM specification D975 Grade S15 will provide good performance.
If the vehicle is exposed to extreme cold (below -7°C [20°F]) or is required to operate at colder-than-normal conditions for
prolonged periods, use climatized No. 2 diesel fuel, or dilute the No. 2 ULSD fuel with 50% No. 1 ULSD fuel. This will
provide better protection from fuel gelling or wax-plugging of the fuel filters.
Table 6.1 Fuel Specifications
Fuel
Specification
Sulphur
(by weight)
Water and
Sediment
(by volume)
Cetane No.
°C (°F)
Lubricity
ULSD Grade
No. 2
ASTM D975
0.5% maximum
0.05% maximum
40 (104) minimum
520 Microns
ULSD Grade No.
1 and 2 mix
15
n/a
1% maximum
0.5% maximum
preferred
0.1% maximum
45
–
55 (113
–
130)
cold weather / high
altitude
460 Microns
15. Optional when operating temperature is below 0°C (32°F).
16. Denotes capacity of a dry system. Refill capacity is 58 liters (15 U.S. gallons).