MacDon M2170NT Operator'S Manual Download Page 129

Page: 129 / 558

262171

109

Revision A

1016236

Figure 3.137: Fault Description Page

Selecting the question mark symbol next to the short
description (Refer to Figure

3.135, page 108

) displays a detailed

description of the fault. If there are multiple faults, telltale
icons (A) will appear on screen in a row.

3.17.18

Clearing Fault Codes

The lists of inactive fault codes stored on the HarvestTouch

™

Display can be cleared using the operator

’

s console.

Turn the ignition key to the ACC or RUN position. Make sure the engine is not running.

NOTE:

You cannot clear fault codes if the engine is running, or if there are any active fault codes.

ϭϬϰϮϬϬϳ

Figure 3.138: HarvestTouch

™

Display

From the HarvestTouch

™

Display

’

s HOME page, press MENU

icon (A) and then press DIAGNOSTIC (B).

OPERATOR

’

S STATION

Summary of Contents for M2170NT















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M2170NT

Reviews:

MacDon M2170NT, Operator'S Manual, Page: 129 / 558

Search results

Summary of Contents for M2170NT

Reviews: