UNLOADING AND ASSEMBLY
Form # 169390
Model Year - 2010
15
METHOD 2
a. Support rear of windrower with jack stands
under the rear frame or with a support under the
shipping stand. Distance between walking
beam and ground should be 55-58 in. (1400-
1473 mm).
IMPORTANT
The support(s) must be capable of
supporting 5000 lb (2270 kg).
b. Attach a sling around caster and the other end
to a lifting device.
c. Hoist caster into position and locate caster
spindle into walking beam.
d. Slowly raise caster while manoeuvring caster so
that spindle slides freely into walking beam.
e. Secure caster in walking beam with washer (A),
bushing (B), and clip (C).
f.
Lower lifting device and remove sling.
g. Repeat above steps for other caster.
h. Raise rear of windrower so that stand can be
removed, and lower windrower to the ground.
i.
Remove rear shipping stand.
j.
Proceed to STEP 6. INSTALL STEPS.
C
B
A
55-58 in. (1400-1473 mm)
FROM GROUND