Macco ILC-200, Technical Instructions

Page: 21 / 72

Pag.21 27/03/2014
THE FOLLOWING INFO ARE DISPLAYED ONLY WHEN THE CLOCK IS PROGRAMMED
Machine service
XXXX YY - ZZZZ
XXXX : Indicates the n° of group cycles left. If
the programmed n° of group cycles exceed the
display shows: ( - XXXX )
YY : Indicates the maintenance month
ZZZZ : Indicates the maintenace year
If the service alarm elapses within one month
or if the 90% of the set number of group cycles
has reached, this parameter can be reset
Machine service
Confirm reset
Enter
Machine service
XXXX YY - ZZZZ
+ / -
XXXX : Indicates the n° of group cycles
programmed.
YY : Indicates the next maintenance month
ZZZZ : Indicates the next maintenace year
N.B.: WITH THE MACHINE SERVICE
RESET WILL BE ERASE ALSO THE
CLEANING GROUP AND MILKER TOTAL
NUMBER.
Yes
No
Enter
Enter
Water filter
XXXX YY - ZZZZ
XXXX : Indicates the n° of water filter liters left. If the
programmed n° of of water filter liters exceed the display
shows: ( - XXXX )
YY : Indicates the maintenance month
ZZZZ : Indicates the maintenace year
If the water filter alarm elapses within one month or if the 90%
of the set number of liters has reached, this parameter can be
reset
Water filter
Confirm reset
Enter
XXXX : Indicates the n° of water filter liters
programmed.
YY : Indicates the next maintenance month
ZZZZ : Indicates the next maintenace year
Yes
No
Water filter
XXXX YY - ZZZZ
Enter
+
+ / -
Enter
WARNING:
The owner’s card can only enter total dose reset environment and water softener alarm reset.
Environments: group cycles, M1 tools time, M2 tools time and water filter litres will be displayed only if values higher than
000 (zero) have been set during the programming stage.