11 Service Manual MACES7C-300-90-00
In order to avoid this kind of damage
:
Only run the machine at temperatures b5°C and +35°C
Only run the machine at humidity between 10% and 90%.
Always store the machine in a dry and dust free environment, the temperature should be in range of
0°C to 40°C.
3.3 SWITCH OFF THE MACHINE
If the location changes or the machine is out of use for a prolonged period of time, the air break, water tank and
boiler must be emptied. This will prevent the water tank and boiler from leaking or freezing.
Caution:
Danger of scalding
Before disconnect the pipe to empty boiler, the water in boiler must be cooled to avoid hot water scalding
and splashing.
Before disconnect the pipe to empty boiler, the water in boiler must be cooled to avoid hot water scalding and
splashing.
Important!!
Please refer the instruction to empty boiler, water tank and air break on Page 50.
4 MACHINE DESCRIPTION
4.1 POSITIONING OF THE VENDING MACHINE
The machine is not suitable for outside installations, it needs to be installed inside dry premises, with
temperature between 5°C and 35°C and it cannot be installed in environments in which jets of water are used
for cleaning.
The machine shall be positioned next to a wall and in such a way that the back of it is at a minimum distance of
6 cm from the wall in order to allow regular ventilation.
The machine shall not be covered with cloths or similar. The machine shall be positioned so that the maximum
inclination does not exceed 2°. If needed, level it out using the appropriate adjustable feet provided with the
machine.
4.2 PAYMENT SYSTEM
The machine is supplied with electrical arrangement for systems with protocol Executive, BDV, MDB and
for
monitoring 24 VDC validators.
Apart from the coin mechanism housing, there is space for the optional installation of the most common
payment systems.