then press it to confirm. Scroll through the menu by turning the control disc and select
“Exit” to leave the programming mode.
You can now choose Single Dose, Double Dose or Continuous Dose in the
selection menu.
6-8
Dose count
The appliance has software installed to check the number of doses in the “Single
Dose” and “Double Dose” functions.
To display and cancel the number of doses, proceed as follows: turn the appliance on,
after the initial message you can enter the programming mode by pressing the control
disc for 10 seconds or until the word changes on the display. Scroll through the menu
by turning the control disc until the wording “Dose Count” appears, then press the disc
to enter the display. Turn the control disc to move from one function to another ((Partial
Single, Total Single, Partial Double, Total Double, Exit). You can reset the partial dose
count by pressing the control disc for 15 seconds or until the value “0” appears on the
display. Select “Exit” to leave the “Dose Count” function and again “Exit” to leave the
programming function.
6-9
Software version
The programming also allows displaying the software version that is used by the coffee
grinder. This information could be requested by the service centre in case there are
any operating faults.
To display the installed software version, enter the programming mode by pressing the
control disc for 10 seconds or until the wording changes on the display. Scroll through
the menu by turning the control disc until the wording “Release …..” appears, the
figure after the word indicates which software version is installed. Scroll through the
menu and select “Exit” to leave the programming mode.
7
CLEANING
UNPLUG THE MACHINE FROM THE SOCKET BEFORE DOING ANY SORT OF
CLEANING WORK.
NEVER PUT THE APPLIANCE IN WATER.
DO NOT USE ABRASIVE DETERGENTS, AS THEY COULD RUIN THE POLISHED
PARTS OF THE APPLIANCE.
7-1
Movable plastic parts
Remove the movable parts from the machine (lid, hopper, etc.) and wash them in
abundant water and mild detergent (do not wash them in a dishwasher.
7-2
Machine body
Use a damp cloth to clean the machine body, paying special attention to the parts that
could be damaged by water, like the screen, control button and dosing button.
7-3
Grinder
Remove the safety screw from the hopper and unscrew the regulation nut by turning it
in a clockwise direction. Remove the upper grinder support; clean the grinders and the
threading on the grinding unit with a brush. When they are clean, screw on the upper
grinder support (remember to screw it on until the grinders touch and then unscrew it
by one turn, which makes it easier to regulate the grinding coarseness afterwards). Fit
10
ENGLISH
