Micro USB 2.0 Port(Input)
The built-in Micro USB 2.0 is for SD data transfer and charging the internal battery when connected
directly into the computer’s USB port or wall chargers. This works only under Power Off mode.
USB Host Port(Output)
The built-in USB Host port accepts external storage such as Flash drive or USB drive. It also outputs
power to charge your mobile device when needed.
Reset Button and Default Settings
To reset to factory settings, such as WiFi network name, WiFi password, Admin password, IP address
etc. while WIFISD is powered on in Wireless mode, use a paper clip to press Reset button for 5 seconds.
Then let WIFISD reboot automatically to restore to default settings. Below is default factory settings:
LEDs
Battery LED:
LED Off:
Battery full or Drive off
*UHHQ&RORU
On: Drive on
Slowly flashing:
Battery charging
Flashing Fast:
Product shutting down
Red Color:
Solid Light:
Low battery
SD LED:
LED Off:
The product is switched off
White LED:
Host name
WiFi network name(SSID)
WiFiSD-xxxx
IP address
WIFISD
WiFi password
12345678
Admin password
(blank)
10.10.10.254
9
