800.MACTOOLS
69
Select
Customize
Ignition
uattro
vant 3.2
Current
Data Stream
Volkswagen/Audi Group
Select
Customize
Select
Customize
System Status
Ignition
Knock Control
System Status
4
1
+
-
/
=
,
.
7
)
(
5
2
8
0
*
*
6
3
9
#
System Status
101001
0101
1001
Cadillac
ENGINE (01)
2003
All Data Groups
Cancel
OK
Enter a Group Between: 0 and 255
Volkswagen/Audi Group
ss02478
4. Select the Volkswagen/Audi Group. When finished go to Step 6.
Current
Data Stream
All Data Items
Search all Data Streams
Select
* Clutch Start Switch (If Equipped)
* PNP Switch (If Equipped)
A/C High Side Pressure Sensor
A/C Pressure Disable
A/C Relay Command
Acceleration Pedal Position At Idle
Accelerator Pedal Position Sensor 1 Voltage
Customize
All Data Groups
All Data Items
EVAP Data
Engine Data 1
EVAP Data
Engine Data 1
Engine Data 2
Engine Data 3
Fuel Trim Data
Misfire Data
TAC Data
101001
0101
1001
Cadillac
ENGINE
2003
CTS
Luxuary Sport 3.2
Select
Customize
Select
Customize
* Cruise Clutch Switch (If Equipped)
A/C High Side Pressure
A/C Off For Wide Open Throttle
A/C Relay
A/C Request
Accelerator Pedal Position Angle
Accelerator Pedal Position Sensor 2 Voltage
Accelerator Pedal Position Angle
Calculated BARO
Engine Coolant Temperature
Engine Speed
Evaporative Emissions Vent Solenoid
Fuel Level Sensor Left Tank
Fuel Tank Pressure
Battery Voltage
Desired Idle Speed
Engine Run Time
Evaporative Emissions Canister Purge
Fuel Level
Fuel Level Sensor Right Tank
Fuel Tank Pressure Sensor
All Data Groups
ss02479
5. Follow the prompts on the screen. Select or Customize a group.
Data Groups
• Data groups may be selected at any time within data stream.
• Select the data group menu button from the top of the screen.
• Scroll through the menu until the desired data group is found, then select it.
Note: It is possible to change controllers while in data stream.
• Select the controller selection button.
• Select the desired controller.
• Once controller is selected, select the data group menu button.
• Select the desired data group.
