800.MACTOOLS
65
Diagnostic Trouble Codes
Current
Subrau
ABS
2002
1) Take out diagnosis connector from side of drive’s seat heater unit.
2) Turn ignition switch Off.
4) Turn ignition switch On.
5) ABS warning light is set in the diagnostic mode and blinks to identify trouble code.
6) After the start code (11) is shown, the diagnostic trouble codes (DTC) will be shown in order of
3) Connect diagnosis connector terminal 6 to diagnosis terminal.
CHECK
Forester
Base 2.5
ss02472
4. Select Clear DTCs button.
Diagnostic Trouble Codes
1) After calling up a diagnostic trouble code (DTC), disconnect diagnosis connector terminal 6 from diagnosis terminal.
2) Repeat 3 times within approx. 12 seconds; connecting and disconnecting terminal 6 and diagnosis terminal for at least 0.2
seconds each time.
3) NOTE: After diagnostics is completed, make sure to clear memory. Make sure only start code (11) is shown after memory is
cleared.
Current
Subaru
ABS
2002
CHECK
Forester
Base 2.5
ss02473
5. Follow the prompts on the screen.
Code Criteria
Codes will be read from the selected controller and displayed on the screen.
Diagnostic Trouble Codes
Current
GMC
Crankshaft position (CKP)-
Camshaft Position (CMP)
PCM
2003
P0016
Crankshaft position (CKP)-
Camshaft Position (CMP)
P0016
Crankshaft position (CKP)-
Camshaft Position (CMP)
P0016
MAF Sensor Performance
MIL Codes
Fail Since Clear
MIL Codes
History Codes
History Codes
MIL Codes
Fail Since Clear
Fail Since Clear
P0101
MAF Sensor Performance
P0101
MAF Sensor Performance
P0101
MAF Sensor Performance
P0101
MAF Sensor Circuit Low
Frequency
P0102
MAF Sensor Circuit Low
Frequency
P0102
MAF Sensor Circuit Low
Frequency
P0102
MAF Sensor Circuit Low
Frequency
P0102
Crankshaft position (CKP)-
Camshaft Position (CMP)
P0016
0
0
0
12
7
0
12
7
7
7
12
12
Yukon XL..
SL
T 8.1
ss02474
If a DTC has code criteria available there will be an indication in the upper right corner of the listed DTC.
