MAC PARA Magus XC2, User Manual

Page: 9 / 32

9
TECHNICAL SPECIFICATIONS
High Performance Magus XC2 Magus XC2 Magus XC2 Magus XC2 Magus XC2
Size 23 25 27 28 30
Zoom flat [%] 92,5 96,5 100 102,7 105,5
Area flat
[m
2
]
23,27 25,33 27,20 28,69 30,27
Area projected
[m
2
]
20,56 22,38 24,03 25,35 26,75
Span flat [m] 12,44 12,98 13,45 13,81 14,19
Span projected [m] 10,73 11,19 11,60 11,91 12,24
Aspect ratio flat - 6,65 6,65 6,65 6,65 6,65
Root cord [m] 2,34 2,44 2,53 2,60 2,67
Cells - 77 77 77 77 77
Weight [kg] 5,5 5,9 6,4 6,7 6,9
Weight range [kg] 70-87 83-100 90-110 100-120 115-135
Min.speed [km/h] 23-25 23-25 23-25 23-25 23-25
Max.speed [km/h] 37-39 37-39 37-39 37-39 37-39
Top speed (accelerator) [km/h] 55-58 55-58 55-58 55-58 55-58
Glide ratio - 10,5 10,5 10,5 10,5 10,5
Min. Sink rate [m/s] 1,05 1,05 1,05 1,05 1,05
* Pilot + approx. 17 to 20kg of equipment (including wing)
HARNESS
The Magus XC2 is certified with LTF GH type certified harnesses. Nearly all harnesses
available on the market are „GH“.
These “GH“harnesses are different to “GX“ harnesses, which have a lower attachment
point for the main karabiners and effective cross bracing. The Magus XC2 was not
tested with harnesses with an effective cross bracing system.
Any certified harness with a hang point at about chest height may be used with the
Magus XC2 (37-50cm over seat plate). The distance between left and right main
karabiners should be between 45 and 60cm, depending on the size of the pilot and the
type of the harness. Please note: the hang point position changes the position of the
brakes relative to the pilot’s body.
MAC PARA recomends very comfortable covered Hawaii harness for flying Magus XC2.