MAC PARA Magus XC2, User Manual

Page: 7 / 32

7
(&(
Test your speed system for the correct length of cord on the ground first (simulating
flying position), with your harness and risers, before flying with it! The full range is
reached when the 2 pulleys join together.
Before launch, attach the paraglider’s risers to the harness with the main karabiners.
Then attach the ”Brummel-hook” on the end of each speed system cord to the Brummel
hook on the end of the cord which runs through the 2 pulleys on the A risers. Ensure
that the speed system is untangled and operates freely before flying!
Riser
Riser lengths Magus XC2
The lengths are measured from the main attachment point to the lower edge of rapid links.
A A1 B C
Trim-position
520 520 520 520
Accelerated
345 345 405 520
Color
marking
Loop for main
karabineer
Trimm postition Accelerated
Brake handle
Change of the
angle of attack
A A1 B C
A A1 B C
Brakeline
pulley
Magnet button
Slower
Accelerator
Swivel
Faster