EN
18
In
more
detail...
MPHT55050
by MacAllister
Intended use
Harness
This electric hedge trimmer MPHT55050 is designated with a rated power input
of 550 Watts.
The product is intended for cutting and trimming of hedges, bushes and shrubs
in domestic gardens. The maximum cutting capacity must be observed. Do not
cut branches exceeding the stated maximum capacity.
The use of this product in case of rain or humid environment is prohibited.
For safety reasons it is essential to read the entire instruction manual before
first operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
The harness (17) helps the operator to carry the
product.
1. Place the harness (17) so that it runs over the
left shoulder, crossing the chest and back. The
securing clip (17a) must be located at the right hip.
The quick release (17b) must be in front (Fig. 5).
2. Adjust the length of the harness (17) so that the
securing clip (17a) is approximately 15 cm below
your waist.
3. Attach the securing clip (17a) to the loop (10)
(Fig. 6).
4. Lock the harness (17) onto the loop (10) by the
securing clip (17a) (Fig. 7).
Product functions
17
17b
17a
Fig. 5
10
17a
Fig. 6
10
17
17a
Fig. 7
