EN
15
MPHT55050
by MacAllister
Getting
started...
Before you start
Connection to power supply
1. Double the power cord (13) back, about 60 cm from the power guard and lead
the loop through the hole of the rear safeguard (14) (Fig. 3).
2. Pull it over the cord retainer (15) and gently tug on the power cord (13) to
ensure that it is firmly secured (Fig. 4).
3. Connect the plug of power cord (13) with a suitable socket.
NOTE:
The product is equipped with a power cord with the length
of 10 m. If a proper extension cord is required for operation. The
extension cord must be suitable for outdoor use with sockets
protected against water splashing! Ensure the extension cord is of the
proper size and type for your product (≥ 1.0 mm²)!
Always use a residual current supply (RCD) protected supply.
15 14
13
Fig. 3
15 14
13
Fig. 4
