EN
21
In
more
detail...
MPHT55050
by MacAllister
1. Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
2. Double check that the accessories and attachments are properly fixed.
3. Always hold the product on its handles. Keep the handles dry to ensure safe
support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
1. Make sure that the blade cover (18) is removed.
2. Ensure that no people or animals are in the work area.
3. Adjust the product to a suitable pole length and blade head angle.
4. Carry the product with the harness (17).
green leaf hedges
June to October
evergreens
April and August
conifers and other fast growing shrubs every 6 - 8 weeks
WARNING!
Ensure the power cord or the extension cord will not
touch the cutting device (blade) (1) during operating!
Danger of electric shock!
Operation
General operation
Trimming times
Trimming
NOTE:
Try to keep the cutting device angled at approximately 15° to
the cutting surface.
