mabe Kraken, Service Manual, Page: 57 / 88

Ingeniería de Servicio
- 57 -
Service Mode Tests
Knob Index / Test
number (Displayed
on SSD, 7-segment
display, if present)
(Without SSD will
be displayed in
binary format. (See
Binary Chart)
Test Name
Description of test
If tests call for numbers to be shown it will:
(Display on SSD, 7-segment display, if present)
(Without SSD will be displayed in binary format.
(See Binary Chart) Turning the cycle knob will
index to the next or prior test.
0
All LEDs on
All LEDs on the display will be blink including “88”
on the (7-segment display) SSD at a rate of 1 Hz.
1
Fault Codes Models without 7-segment display:
Faults will be shown:
- On
Start button press, blink first fault code in
binary. (See Binary Chart)
- On next
Start button press, blink next fault
code.
- At end of list OR if no fault codes are present,
blink all LEDs.
- Pressing
Start at the end of the fault list will
wrap back around.
- Use the fault sequence.
7-segment display models:
On
Start button press, blink first fault code
Display fault code in SSD
At end of list OR if no fault codes are present,
washer will fla
sh “- -“.
2
Personality
ID Pressing Start will start the test.
Flash the set personality after pressing
Start .
Models without SSD use binary to show
personality.
Model with SSD will display personality.
(See Personality ID Chart for the correct ID for
the model being checked).