mabe Centauro CLGG70214 Series, Service Manual

Page: 127 / 138

55 | Manual de Servicio
Ingenieria de Servicio
3 t3 Softener valve (Applies for
models with Dispenser)
(led "spin" + "rinse")
X
Turn on valve during test (Auto-off in 60s)
4 t4 Chlorine valve NA Turn on valve during test (Auto-off in 60s)
5 t5 Drain pump /
Thermoactuator / Lid Lock
(led " spin " + "wash")
X
Turn on drain pump, switch to Spin mode and spin,
lock the lid
6 t6 Drain pump
(led "rinse" + "wash")
X
Turn on drain pump during test
7 t7 Lid Lock NA Lock the lid
8 t8 Pressure sensor
(led "eco")
X
If the control board detects correct sensor
operation, it activates the valves and fills until it
reaches 2 inches of water.
The test ends successfully when this level is
reached.
The display shows the water column value
(example 1.5in H2O, shows 15)
On models with Knobs, 1 LED will light for every
0.5"
9 t9 Speed Sensor / TRIACS
(“ eco ” + “ spin ” led)
X
A shaking pattern is performed in both directions
to validate the reading of speed sensor pulses and
operation of triacs
10 tA Lid Switch
(led "eco" + "rinse")
X
The control board shows the status of the lid on
the display and with LEDs:
Open lid:
"LO" on display