mabe Centauro CLGG70214 Series, Service Manual

Page: 105 / 138

33 | Manual de Servicio
Ingenieria de Servicio
DISASSEMBLY
Main-Cabinet Harness
Cut the ties that hold the Main Harness to the Cabinet
using cutting pliers.
Access Panel
Using a Phillips screwdriver, remove the 2 screws from the
Access Panel, one at each top end.
Capacitor
With a flat screwdriver, pry the capacitor's lock to
disassemble it.
Capacitor Harness
Manually disconnect the Cabinet Harness.
Control Board
Manually disassemble the 7 connectors of the Control
Board.
Using your thumb and index finger, grasp the Pressure
Switch Hose, twist it, and pull it forward to disassemble it
from the Pressure Sensor. Do not use too much force to
avoid damaging the Sensor.