English
9
5
5 -- INSTALLATION OF DOORS
1. Start by disassembling the handle set.
2. Insert the aluminum plat (3), the clear gasket (2) and
the round bushing (1) into the special screw (4).
3. Insert the assembly through the glass panel as shown on the
illustration, the screw head should be on the inside of the
shower.
4. Insert the clear gasket (2) on the screw, on the other side of
the glass panel
5. Repeat step 2 to 4 for the bottom of the handle.
6. Using a Philips screwdriver, tighten the screw (4) onto the
outside handle (8) for the top and bottom of the handle.
7. Insert the inside handle (5) in the screw heads.
8. Using the provided Allen key, tighten the setscrews on the
screw to secure the handle in place.
Note: Use the longer side of the Allen key to screw the
setscrews; it can be angled to facilitate the process. Use the
shorter side of the Allen key to securely tighten the setscrews.
5
1
4
2
7
6
3
8
Glass Panel
6
6 -- INSTALLATION OF HANDLES
Turn the screw clockwise to raise, and
counterclockwise to lower.
1
1
2
2
3
3
Roller top view.
Groove for rollers.
1- Enter the shower cabin. Lift the
door and tilt it forward to be able
to rest the top rollers in the upper
rail grooves.
2- Press the lower roller
engagement buttons and push for
the doors. Lower rollers must be
aligned in the lower rail grooves.
3- Use the leveling screws on the
top of each door panel to move the
door to its heigthest point without
forcinge the screws.
Doors should open and close easily. Close the doors so that
magnetic strips contact each other, in order to see whether
adjustment is required. Top of doors should be at the same
height, and the space between doors, when they close, should
be uniform.
If the two doors require adjustment, raise or lower one of the
roller assemblies (or both of them) using the top-mounted
adjustment screw.
x2
Inside Shower
Outside
Shower
