English
10
1
1
8
8 -- SILICONE APPLICATION
1
1
To ensure tightness of the shower door, apply a high-quality silicone caulk, as indicated.
Let the caulk cure for 24 hours before using the shower.
Note: Apply silicone caulk to the locations outside the shower cabin.
7
7 -- INSTALLATION OF SEALS
With the sliding doors fully open, install the door seal on the edge
of the stationary panel, as indicated on the figure. Cut it as
required.
NOTE
: The door seal lip must face inside the cabin, as
indicated. Repeat the procedure for the other stationary panel.
Install the door seal on the rear edge of the sliding door
panels, as indicated on the figure. Cut it as required.
NOTE
: The door seal lip must face outside the cabin, as
indicated. Repeat the procedure for the other sliding panel.
The lip is facing toward
the cabin.
NOTE: When the sliding door panels
are closed, the seals are facing each
other, as indicated above.
2
2
x2
x2
