Version 5.1
12
_________________________________________________________________________________
_________________________________________________________________________________
The model TAURUS comes with the
piling
option as standard
.
This option allows to seal both normally stacked envelopes (
see Picture 1, Page
13
) as well as nested envelopes (
see picture 2, Page 13
)!
Settings for different letter thicknesses:
1.
The
position 1
(standard) of basin support and separate pressure
-
plate
unit can be used for thickness
up to 8 mm
(all formats). For thickness
above 8 mm up to 16 mm
the basin support and separate pressure
-
plate
unit need to shift in
position 2
.
2.
Therefore release the knurled nut on the bassin support slightly and lift the
bassin support together with the basin to the upper limit stop (5mm) and
fix the knurled nut again (picture 1+2, page 14). Same happens with the
separate pressure
-
plate unit (picture 3+4, page 14). Release knurled nut
slightly and shift the separate pressure
-
plate unit to the upper position (12
mm) and fix the knurled nut again.
The height adjustment of basin and separate pressure
-
plate unit needs to be executed together obligatory!
5.2 Model „TAURUS IR / IRC:
This Envelope Sealing Machine
Model TAURUS IS / IRC
is equipped with the
additional integrated, photoelectric Infrared system
(IR)
and uses automatic
START/STOP function.
1.
First adjust the format slide according to the envelope width leaving an ad-
dition of 2 mm gap and fix the pile angles in the receiving tray according to
the envelope size.
2.
Then turn the machine on using the power switch (control light turns on,
but the conveyor belt is not running yet
!)
3.
Insert the stack and only now the engine is automatically switched
on. Once the last envelope has been processed, after approximately
3
-
4 seconds the machine will automatically turn off.
WARNING !
Do not touch once the conveyor belt is running! Do not
rest your hands on the machine! Take care with long hair
or dangling jewellery when near the moving parts.