Version 5.1
11
_________________________________________________________________________________
_________________________________________________________________________________
5 INSTRUCTION FOR USE
5.1 Standard use, model "TAURUS"
Switch on with the main toggle switch next to the powercord input.
Turn the rotary control switch to approx. 70
-
100% (position 7 ... 10).
Set the five transport rollers by moving the axis of its lever arms in the
areas along the back side as close as possible to the envelope flap.
The flaps may under no circumstances pass under the
feed rollers!
In this way both narrow and wider envelopes with long
flaps can be transported and closed effortlessly.
Place all the envelopes of the same width together, place the flaps all on the
same side.
The format slide should be positioned with an additional 2mm space around
the edge of the envelope and for longer formats they should open to the
left.
Place the pile angles in the receiving tray according to the envelope size set.
With the left hand take a stack of envelopes, all with he same side facing up
and the envelopes staggered up towards the back.
Only place the letter stack on when the conveyor belt is
running so that the lowest envelope is always taken first!
Take the sealed envelopes out of the stack and press the top flap lightly.
More stacks of letters can be added during running.
When idle, adjust the speed control using the rotary knob to position "0"
and if necessary, turn the machine off completely.
The model TAURUS IR/IRC stops after a delay of 3 to 4 sec. automatically
after the last envelope has passed the conveying sytem.
