C
HAPTER
2: N
ETWORK
S
ETUP
S
ET
UP
THE
N
ETWORK
FOR
A
UTHENTICATION
M86 S
ECURITY
U
SER
G
UIDE
37
3. In the Block Page Device frame:
• If using the invisible mode, select “LAN2”.
• If using the router or firewall mode, select “LAN1”.
If using the invisible mode, the Block Page Delivery
Method frame displays. Choose from either of the two
Protocol Methods
:
• “Send Block Page via ARP Table” - this option uses the
Address Resolution Protocol method to find the best
possible destination MAC address of a specified host,
usually the Web Filter gateway.
• “Send Block to Specified Host MAC Address” - using
this preferred method, the block page will always be
sent to the MAC address of a specified host, usually
the Web Filter gateway.
Choose from either of the two
Block Page Route To
selections:
• “Default Gateway” - this option indicates that the
default gateway on your network will be used for
sending block pages.
• “Alternate IP Address” - this option should be used
if block pages are not being served.
Enter the
IP
address of the router or device that will
serve block pages.
4. Click
Apply
.
