M7 DJS-101A, Manual

Page: 11 / 84

ASSEMBLY
TO ATTACH THE BATTERY PACK
(FIG.1)
SWITCHING ON AND OFF (FIG. 2)
VARIABLE SPEED TRIGGER
SWITCH (FIG. 2)
ELECTRIC BRAKE
TO ATTACH THE BATTERY PACK
(FIG.1)
Align the raised rib on the battery pack with
the grooves on the bottom of the jig saw and
then attach the battery pack to the jig saw.
When placing the battery pack in the tool, be
sure that the raised rib on battery pack aligns
with the groove on the jig saw and that the
latches snap into place properly. Improper
assembly of the battery pack can cause
damage to internal components.
Allow the blade to come to a complete stop
before setting the jigsaw down.
This tool has a variable speed switch that
delivers higher speed with increased trigger
pressure. Speed is controlled by the amount
of switch trigger depression.
NOTICE: Use the variable speed feature for a
short time only. Do not continuously operate
the tool at different speeds. It may damage
the switch.
To stop the jig saw, release the trigger switch
and allow the tool to come to a complete
stop. The electric brake quickly stops the
saw blade stroke. This feature engages
automatically when you release the trigger
switch .
To turn the jig saw ON, keep the lock-off
button depressed and squeeze the trigger
switch. To turn it OFF, release the trigger
switch.
1. Depress the battery-release button located
on the front of the battery pack to release
battery pack.
2. Pull the battery backward and remove it
from the tool.
FIG. 1 FIG. 2
CAUTION:
!
CAUTION:
!
11