M2TECH Young MKIII User Manual Download Page 9

Page: 9 / 61

YOUNG M

III

DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER

REVISION P

A – AUGUST 2017

M2Tech

www.m2tech.biz

2. Front Panel

Figure 1

1) Power on/power off/mute/menu exit button.

Press this button to switch the

YOUNG

MKIII

on when it’s off. When the

YOUNG MKIII

is on, a short press will toggle mute, unless

the menu is active: in this case a short press will cause the menu to exit discarding any
configuration change. A more prolonged press while the

YOUNG MKIII

is on will cause it to

switch off.

2) Standby LED.

When the

YOUNG MKIII

is in standby mode, this LED blinks to indicate to

the user that the device can be switched on by the included remote control. This LED is
steadily lit during the firmware update procedure.

3) IR receiver.

Aim the remote control to this point to send commands to the

YOUNG MKIII

4) Display.

Multifunction OLED display. During normal operation, it indicates the listening

level, the selected source, the swampling frequency (not for analog), the format (not for
analog) and the status of mute and phase (if set). When the menu is accessed, the display
shows the selected menu item and its current value.

5) Encoder.

It allows for accessing and navigating the menu, selecting inputs and setting

the volume. It can be rotated and pushed. Please refer to Chapter 7 for more details.

Summary of Contents for Young MKIII

















































Search results

Summary of Contents for Young MKIII

Reviews:

Related manuals for Young MKIII

Brands by name

Popular brands

M2TECH Young MKIII, User Manual

Search results

Summary of Contents for Young MKIII

Reviews:

Related manuals for Young MKIII

Brands by name

Popular brands