email | [email protected]
tel | 727-732-2727
HARDWIRED INSTALLATION PROCEDURE
FOR ACCESSORY CABLE PART # AHRHW
*Note – IF a non-OBD II cable is used the camera will default to power on when
the camera senses movement and power off when the vehicle is parked and will
not provide any DTC, FUEL, OR VEHICLE NETWORK INFORMATION.
*Note if you do not have an account already set up note the camera serial num-
ber that is located on the product box, activation card, or on the bottom of the
camera, you will need this information when requesting an account set up at
m2minmotion/.com/getstarted
Using optional cable Part # AHRHW:
Confirming the final installation:
Red-
Connect to 12-volt constant power or directly to the vehicle’s battery
Black-
connect to the vehicle’s chassis ground using a self-tapping grounding
screw and ground ring terminal or directly to the vehicle battery.
1. Once the camera is connected, place the vehicle outside with an unob-
structed view of the sky and start the vehicle and let it run for 5 minutes
allowing time for the DCRCCAM1 to communicate with the vehicle’s network.
2. Login into the M2M account and confirm the vehicle is tracking and video is
streaming.
