M Vision CINE 400-3D, Service Manual, Page: 8 / 82

PRERR (execute) Query the error log
BOOTOP = ?
3: for bootloader
4: for NXP
9: for FPGA
10: for FE FPGA
Note: for firmware
upgrade.
PATTERN = ?
0 = Off
1 = White
2 = Black
3 = Red
4 = Green
5 = Blue
6 = Cyan
7 = Magenta
8 = Yellow
9 = ANSI Checkerboard
10 = Focus Grid
11 = V Burst
12 = H Burst
13 = Color bar
OSD pattern
PICTURE.MUTE = ?
0: Off
1: On
Only allow to run in 2D
mode
Below for R&D engineer and factory use only, NOT for customer.
FACTORY.RESETALL (execute)
Note: reset all the
settings to factory
default. (for factory use)
FACTORY.SN = max 13 characters input Note: for factory use.
CW.INDEX = ?
Note: color wheel index
adjustment, for factory
use.
BURN = ?
0: Off
1: On
Burn-In.
EDID.WRITE (execute) Update the EDID for HDMI and Dsub15
EDID.READ (execute)
Read the EDID contents of HDMI and
Dsub15
ENV.CHECK = ?
0: Off
1: On