M-system MECHATROLINK R7K4FML3-6-DAC32B, Instruction Manual, Page: 3 / 11

R7K4FML3-6-DAC32B
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-7773-E Rev.3 P. 3 / 11
■
I/O TERMINAL ASSIGNMENT
14
5 6
X7
X6 X8
15
X9
16 17 18
7 8 9
X11 X13 X15
X10 X12
10
1 2
COM
COM X0
11
X1
12 13
3 4
X3 X5
X2 X4 X14
NO. ID FUNCTION NO. ID FUNCTION
1 COM Common 10 COM Common
2 X0 Input 0 11 X1 Input 1
3 X2 Input 2 12 X3 Input 3
4 X4 Input 4 13 X5 Input 5
5 X6 Input 6 14 X7 Input 7
6 X8 Input 8 15 X9 Input 9
7 X10 Input 10 16 X11 Input 11
8 X12 Input 12 17 X13 Input 13
9 X14 Input 14 18 X15 Input 15
32
23 24
Y7
Y6 Y8
33
Y9
34 35 36
25 26 27
Y11 Y13 Y15
Y10 Y12
28
19 20
V+
V- Y0
29
Y1
30 31
21 22
Y3 Y5
Y2 Y4 Y14
NO. ID FUNCTION NO. ID FUNCTION
19 V– Out. Common 28 V+ External excitation
20 Y0 Output 0 29 Y1 Output 1
21 Y2 Output 2 30 Y3 Output 3
22 Y4 Output 4 31 Y5 Output 5
23 Y6 Output 6 32 Y7 Output 7
24 Y8 Output 8 33 Y9 Output 9
25 Y10 Output 10 34 Y11 Output 11
26 Y12 Output 12 35 Y13 Output 13
27 Y14 Output 14 36 Y15 Output 15
MOUNTING INSTRUCTIONS
■
DIN RAIL MOUNTING
• Mounting
1) Set the upper hook at the rear side of the unit on the DIN
rail.
2) Push in the lower.
1
2
• Dismounting
1) Push down the DIN rail mounter slider with tip of a mi-
nus screwdriver.
2) Pull the lower of the unit.
3) Remove the upper hook of the unit from the DIN rail.
1
1
2
3
■
SURFACE MOUNTING
1) Insert the two DIN rail mounter sliders until it clicks
once, as shown below.
1
1
2) Mount the unit with M4 screws referring the Mounting
Requirements. (Torque: 1.4 N·m)