MOUNTING REQUIREMENTS
unit: mm (inch)
54 (2.13)
B
A
120 (4.72)
[Base Socket]
75 (2.95)
[Mounting Block]
4–6 (.24) dia. or M5
A
225 (8.86)
MB-08
428 (16.85)
B
215 (8.46) 418 (16.46)
MB-16
120 (4.72)
[Base Socket]
48 (1.89)
2–4.5 (.18) dia. or M4
75 (2.95)
[Mounting Block]
[29]
(1.14)
■
MB-01
26 (1.02) min.
15 (.59)
120 (4.72)
[Base Socket]
48 (1.89)
2–4.5 (.18) dia. or M4
75 (2.95)
[Mounting Block]
[29]
(1.14)
[33]
(1.30)
■
MB-P1
■
MB-08, MB-16
50 (1.97)
min.
40 (1.57)
[ ] indicates a space required for NPT fitting.
PIPING
Choose an appropriate pipe diameter considering the re-
quired supply pressure to all transducers mounted onto the
MB.
Connect a stopping valve at the pipe connection to the air
header for easy testing and maintenance.
Blow the piping before installing the transducers in order to
remove dust in it. Use dry air containing no carbon black or
other foreign particles. To ensure reliability, use an air filter
(0.01 microns). Be sure that no water, oil or dust particles
enter the transducer by way of supply air.
Tightening torque is at the maximum of 12 N·m. Check
that there is no air leak at the connection after sealing it.
MB
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-3430 Rev.2 P. 5 / 5
