M-system M1EXV-4, Operating Manual

Page: 26 / 37

M1EXV-4
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-6040-B Rev.2 P. 26 / 37
[01] Lockout setting
Enable / disable lockout setting.
SETTING VALUE DESCRIPTION INITIAL VALUE
Lock Enable Lockout setting
Lock
Unlock Disable Lockout setting
When Lockout setting is enabled, it is possible to shift to each setting mode and confirm the setting value of each setting
parameter item. Each parameter item display indicates ‘DATA (Locked)’ when set to ‘Lock’, and indicates ‘DATA’ when set
to ‘Unlock’.
[401] Display1 setting / [402] Display2 setting / [403] Display3 setting / [404] Display4 setting
Set the screen display for Measuring mode.
The display can be divided into upper and lower parts and items to be displayed can be respectively selected.
Press Set button once to set an item for the upper part. Press Set button again, to set an item for the lower part.
Press Set button once more to save the settings.
The display will be blank in Measuring mode if both the upper and lower parts are set to ‘None’.
Upper
SETTING VALUE DESCRIPTION INITIAL VALUE
Ch1 INPUT Ch1 Input engineering unit value Ch1 INPUT
(engineering value)
Ch1 INPUT (Scaling)*
1
Ch1 Input scaling
Ch1 PERCENT Ch1 Percent value* 2
Ch1 OUTPUT Ch1 Output engineering unit value
Ch2 INPUT Ch2 Input engineering unit value
Ch2 INPUT (Scaling)* 1 Ch2 Input scaling
Ch2 PERCENT Ch2 Percent value*
2
Ch2 OUTPUT Ch2 Output engineering unit value
Ch3 INPUT Ch3 Input engineering unit value
Ch3 INPUT (Scaling)*
1
Ch3 Input scaling
Ch3 PERCENT Ch3 Percent value*
2
Ch3 OUTPUT Ch3 Output engineering unit value
Ch4 INPUT Ch4 Input engineering unit value
Ch4 INPUT (Scaling)*
1
Ch4 Input scaling
Ch4 PERCENT Ch4 Percent value*
2
Ch4 OUTPUT Ch4 Output engineering unit value
None*
3
No display
Lower
SETTING VALUE DESCRIPTION INITIAL VALUE
Ch1 INPUT Ch1 Input engineering unit value Ch2 INPUT
(engineering value)
Ch1 INPUT (Scaling)*
1
Ch1 Input scaling
Ch1 PERCENT Ch1 Percent value* 2
Ch1 OUTPUT Ch1 Output engineering unit value
Ch2 INPUT Ch2 Input engineering unit value
Ch2 INPUT (Scaling)*
1
Ch2 Input scaling
Ch2 PERCENT Ch2 Percent value*
2
Ch2 OUTPUT Ch2 Output engineering unit value
Ch3 INPUT Ch3 Input engineering unit value
Ch3 INPUT (Scaling)*
1
Ch3 Input scaling
Ch3 PERCENT Ch3 Percent value*
2
Ch3 OUTPUT Ch3 Output engineering unit value
Ch4 INPUT Ch4 Input engineering unit value
Ch4 INPUT (Scaling)*
1
Ch4 Input scaling
Ch4 PERCENT Ch4 Percent value*
2
Ch4 OUTPUT Ch4 Output engineering unit value
None No display
*1. In Measuring mode, for Ch1, Ch1 INPUT (Scaling) is displayed as Ch1 INPUT (SC).
*2. The value displayed is the value converted into 0.00 to 100.00% based on the input setting value.
*3. The upper part of [401] cannot be set to ‘None’.