54UL
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6488-B Rev.3 P. 12 / 32
• InstObject Configuration Property
CONFIGURATION
PROPERTY
TYPE
{Range}
{Default}
EXPLANATIONS
SCPTmaxSendTime
SNVT_time_sec
{0.0-6553.4}
{3.0}
Sending time intervals of output network variables.
The 54UL does not send out network variables when 6553.4 (sec.) is set.
Used for polling.
SCPTpwrUpDelay
SNVT_time_sec
{0.0-6553.4}
{0.0}
Delay time to start sending network variables after the power is turned on.
SCPTdirection
SNVT_state
{0 or 1}
{0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0}
Bit 0 (first bit) determines the network variable’s sending pattern by each
sending cycle. See the figure below.
0 = All bound variables are sent.
1 = Bound variables are sent one by one.
Power ON
• SCPTdirection bit 0 = 0
• SCPTdirection bit 0 = 1
SCPTpwrUpDelay time
Send
all nv
SCPTmaxSendTime time
Send
all nv
SCPTmaxSendTime time
Send
all nv
SCPTmaxSendTime time
Send
all nv
Power ON
SCPTpwrUpDelay time
Send
1st nv
SCPTmaxSendTime time
Send
2nd nv
Send
last nv
SCPTmaxSendTime time
Send
1st nv
