7
IDM 510-004-3
Safety information
English language
Operation and maintenance manual
Safety Warnings for Operation and Use
– The machine must be used by one single operator ONLY, who must be trained and
capable of performing the work and be in suitable conditions.
– Certain steps might request one or more operators, who must be previously trained
and informed on the tasks they will have to perform.
– Consult the user manual, in particular during the first use, and make sure that you
fully understand its content.
– Find out the position and function of the controls and simulate some operations (in
particular start and stop) in order to acquire familiarity.
– The machine shall be used ONLY for the purposes and complying with the procedures
specified by the Manufacturer.
– Make sure that all the safety devices are properly installed and efficient.
– The machine should be used ONLY with the original safety devices installed by the
Manufacturer.
– Ensure the area around the machine, especially the control post, is ALWAYS unob-
structed and in good condition to minimize the risks for the Operator.
– According to the type of operation to carry out, wear the Personal Protective Equip-
ment listed in the “Instructions for use” and that indicated by the Labour laws.
–
The non-compliance with the information provided herein may lead to risks for
the safety and health of the persons involved and may also lead to economic
damages.
▀
Safety Manager Obligations
– The safety manager must train the operator and help him or her familiarise and interact
with the machine in an independent, adequate and risk-free manner.
– The operator must be informed about reasonably predictable INCORRECT USES and
about the RESIDUAL RISKS that remain.
– The operator must demonstrate that he has acquired the relevant skills and has under-
stood the “User Instructions” in such a way as to carry out his activities safely.
– The operator must be able to recognise the safety signals and demonstrate that he is
in suitable condition to carry out his assigned duties.
– The safety manager must release educational material to trainees and document the
delivered training, so as to be able to produce such documentation in case of litigation.
