29
IDM 510-074-1
Maintenance
English language
Operation and maintenance manual
Size change adjustments
The operations described are required to prepare the machine for sealing a batch
of identical cases.
– The figure shows the points of intervention and the description shows the procedures
to be adopted.
–
The operations must be carried
out with with the machine stopped
and in safe conditions.
▀
Reference
Ê
1.
Prepare a case of the new format
with the bottom and top flaps closed
with adhesive tape.
2.
Loosen the knobs
A
.
3.
Position the guides
C
far enough
apart to allow the case to pass.
4.
Loosen the knobs
B
.
5.
Position the lateral pressure rollers
D
far enough apart to allow the case to
pass.
▀
Reference
Ë
6.
By means of hand wheel
F
move
head
E
to a sufficient height for case
transfer,
7.
Place case onto lower conveyor
G
.
8.
Move the guides
C
until they touch
the case lightly.
The components move symmetrical-
ly.
9.
Tighten the knobs
A
.
▀
Reference
Ì
10.
Adjust the height of conveyor by
means of hand wheel
F
until rollers
E
gently touch case.
Case must not impact belts of upper
conveyor , but should access it with
a moderate pressure.
11.
Push the case up to the pressure
roller area
D
.
12.
Move pressure rollers
D
until they lightly touch case.
Pressure rollers must keep the upper flaps close to each other, without overlap-
ping.
