M Design DIAMOND Gas 550V Instructions For Installation And Use Manual Download Page 6

6

A min = 3,5 cm
B = 19 cm
C min = 22.5 cm

Instructions for installation and use DIAMOND Gas 550V-DV-850V-DV-1150V

3. Installing the fireplace

After having checked the appliance, you are ready to install your appliance. This is 

done as follows

3.1.1 Positioning the appliance

Place the appliance on a stable surface using the adjustable feet. Adjust the height of 
the appliance turning the bolt ( pic 1 )

                         

The appliance must not be placed directly on the floor as 
you need to allow natural convection. The appertures for the 
air supply (IN) is situated underneath the appliances

Regulating the height of the appliance :
This can be made in two ways.
A regulation by 5 cm ( pic. 1 ) and a fine regulation by screw ( pic.2 ).
The minimum height as from ground to the bottom of the appliance is 3,5 cm ( A min ).
The minimum height “C min” will be 22.5 cm, measured as from the ground to 4th side 
frame ( pic.3 ).
The maximum height as from the ground to the 4th side frame is 45 cm for LUNA DH and
max 35cm for Luna CL/CR/DC

pic. 1

pic. 2

Pic 3

Summary of Contents for DIAMOND Gas 550V












































Reviews: