M Design DIAMOND Gas 550V, Instructions For Installation And Use Manual, Page: 19 / 43

19
Instructions for installation and use DIAMOND Gas 550V-DV-850V-DV-1150V
picture 1
3 sided frame
2,5 cm
3,5 cm
4 sided frame
side frame
upper frame
picture 2
picture 3 picture 4
picture 5
picture 6
8. Mounting a 3 sided frame
Fireplace is delivered standard with 4sided frame 3,5cm, an upper and 2 sideframes ( see pic. 2 )
Before mounting the 3 sided frame, remove 4 sided frame ( lower piece ) by lift it carefully up.
Pull out the upper frame and in second way the left and right sideframes. Take the left and right
side of the 3 sided frame ( 3,5 - 7 or 10 cm ) and slide them in the notches ( see pic 4). When those
are placed in a good way, you can adjust the position to the left and to the right and from the the
front to the rear. In this way you can make the frame a good fit to the surrounding. Mount the upper
frame ( pic 5 ) and lastly the 4 sided frame ( pic 6 )
Attention : Pleas pay attention to leave approx 2 mm inbetween
the frame and the finishing material (heat=expansion)