M Design DIAMOND Gas 550V, Instructions For Installation And Use Manual, Page: 30 / 43

30
:
each model is standard delivered with ECO-WAVE
ECO-WAVE is an automatic cycle of fluctuating flames.
At each start-up of the fire, the system starts in ECO-WAVE mode !
6. ECO WAVE
3
1
2
Passion for fire
4
Symbol that indicates that
WAVE is enabled
Press 1x short on the menu
button and “1” appears
(= Wave aan)
Press the arrow up or down.
“0” appears (=Wave off)
confirm
Press 1 x to turn off the fireplace. The fireplace will start-up with 1 or multiple burners depending on the “b” position.
Press 2x on the menu button to see whether the fire is set to “0” of “1” position.
Shut down fire :
Switch off
WAVE
In case you want to go to a thermostatic control, you follow the next steps:
Press 2x the button until you see the screen with the symbols shown in picture 2.
Press or until the symbols and are blinking (pic 2).
Confirm your choise by pressing ( pic.3).
Choose a temperature with the “up” and “down” arrows (pic. 4).
Don’t place the remote control near the fire. The temperature sensor is in the remote
control. To get back to manual control do the smame until and are blinking.
Confirm with
5. Thermostatic control
Instructions for installation and use DIAMOND Gas 550V-DV-850V-DV-1150V