M-Audio DCP-200, User Manual

Page: 8 / 77

User Guide
8
DCP-200
Connections Panel
MIDI
Out
1
2
USB
Input
Level
Aux In
H
e
a
p
h
o
n
e
s
Line Out
9 14 10 11 12 13
9. Headphone Outputs – Plugging a set of headphones into Headphone Output number 1 will disable
the output from the internal speakers, allowing you to play without disturbing others. Plugging
headphones only into the second (bottom) headphone output will not affect the speakers.
10. MIDI Output – This standard 5-pin MIDI connector sends MIDI output signal, for connecting to a
computer or external MIDI device.
11. USB Connector – This is a standard USB 1.1 connector, for connecting to a computer’s USB port.
12. Aux Line In – These RCA connectors allow you to mix an external sound source (such as a CD player or
computer output) with the piano’s internal sounds, for playback through the piano’s built-in speakers
or headphone outputs.
13. Line Out – These RCA connectors can be used to connect the output of the piano to another device such
as a stereo sound system, keyboard amplifi er, mixing console or audio recorder. The level of the Line
Output is not affected by the Master Volume knob.
14. Aux Input Level – This adjusts the input level of the signal connected to the Aux Line Inputs.
Rear Panel
AC100-240V – 50/60HZ
PEDAL
CAUTION
15 16
15. Power Socket – Connect the included 3-pin AC cable here, and plug the other end into an active AC
outlet.
16. Pedal Connector – Connect the pedal board here.