Page 36 of 44
©2018 Lytx, Inc. - Confidential & Proprietary.
Assign the Input in the Lytx Installation Tool
To complete installation of the Remote Push Button,
its input must be properly assigned in the Lytx Install-
ation Tool.
To assign the input:
1. Go to the Assign Device Inputs screen in the
Lytx Installation Tool.
2. Assign GIO C (Blue) to
Remote Record Button.
3. Test the installation. Press either blue button
on the device to manually record an event. The
LED status lights on the ER-SV2 device will
light up green one-by-one from the left to right
until all are lit, indicating the test was
successful
Note: After assigning the Remote Push Button, the Lytx Installation Tool may take up to
several minutes to detect the assignment. Please wait for detection before troubleshooting.
