Page 28 of 44
©2018 Lytx, Inc. - Confidential & Proprietary.
3. Route the cable across the top of the windshield under the window trim or headliner to
the Window Unit.
4. Thread the cable through the security boot. Plug the cable into the Window Unit. Using
your Torx wrench, secure the boot in place. (WARNING: Do NOT use a power driver as
that may shear the heads off the screws.)
If the Window Unit is attached to the bracket arm already, detaching it first may make
this step easier.
5. If it was detached in the previous step, re-attach the Window Unit to the bracket arm
and bracket. Adjust it to hang vertically (plumb).
6. Make sure the cable is clear of any sharp edges, moving parts, and cannot get pinched
in the door jamb.
7. Make sure the cable is tucked away and secured so that it cannot come loose. Lytx
recommends using cable-ties at least every foot, or as necessary, along the route of
the cable to secure it in place.
