Lynx MiniModule S VD 3062, Reference Manual

Page: 25 / 32

Reference Manual S VD 3062 Version1.4
Page 25
Alarm/LED Status Indicators
The S VD 3062 module has built in LED indicators, which
serve as alarm and status indication for the module.
Function is described below.
The Indicators are found on the bottom of the module
and can be seen through the access hole provided.
(Figure 2)
Channel Condition Indicators
LED1 and LED2
LED1 shows status of output 1
LED2 shows status of output 2
Local Control LED 3
LED 3 indicates if local control is enabled. If the LED 3 is
ON (Green) local control is enabled, if LED 3 is OFF
local control is disabled
Front Panel Alarm Indicator
There is also a single alarm LED on the front side of
the module, which is designed for quick and easy
indication of a problem condition in installations where
visible access to the bottom of the module is not
convenient.
LED OFF indicates power is lost, or there is a power
supply fault.
LED Color Indication
Green Input signal present
Yellow Automatic cyclic input switching enabled
Red Input signal lost
LED Color Indication
Green Both selected input signals present
Yellow Only one selected input present
Red Input signals lost