Lynx MiniModule S VD 3062, Reference Manual

Page: 13 / 32

Reference Manual S VD 3062 Version1.4
Page 13
!
Installation
Mechanical
Stand Alone Operation
The S VD 3062 MiniModule can be used in a stand
alone application. There are two options for the use of
the module in this way.
a) Using the R FR 3005 Rack Frame 1 option. This allows
up to any 10 of the MiniModules to be secured
onto a rack frame assembly for 19 inch rack
mounting. This keeps the modules secured,
organized and out of the way. The R PS 3001 power
brick option or the R FR 3010 option is required to
power each module. Please refer to the R FR 3005
Reference Manual supplied with this option for
more details.
b) Single Use. The MiniModule can be powered
independently with the R PS 3001 option and used
in any location where this functionality is required.
Caution. Care needs to be taken when
using the module in this way, as it is not
physically secured. Keep the module
away from the floor to avoid the risk of
someone stepping or tripping on the unit,
and locate the unit away from excessive
sources of heat and any sources or
moisture.
If using more than one MiniModule in any installation,
the R FR 3005/3010 Rack frame combination is highly
recommended.