background image

 HOUSEHOLD PRODUCT WARRANTY

    

UNDERCOUNTER 

ICE MACHINE

TWO YEAR FULL WARRANTY

 Undercounter 

ice machines 

and all of their component parts, 

except as detailed below*†

, are warranted to be free from defective materials or workmanship in 

normal residential use for a period of two (2) years from the date of original retail purchase. 

Lynx

, warrantor, agrees to repair or replace, at its option, any part 

which fails or is found to be defective during the warranty period.

*FULL NINETY (90) DAY COSMETIC WARRANTY:

  Product is warranted to be free from cosmetic defects in materials or workmanship (such as scratches on 

stainless steel, paint/porcelain blemishes, etc.) for a period of ninety (90) days from the date of original retail purchase or closing date for new 

construction, whichever period is longer. Any defects must be reported to the selling dealer within ninety (90) days from date of original retail purchase. 

Lynx

 

uses high quality processes and materials available to produce all color finishes. However, slight color variation may be noticed because

 

of the 

inherent differences in painted parts and porcelain parts as well as differences in kitchen lighting, product locations, and other factors. Therefore, this 

warranty does not apply to color variation attributable to such factors.

 †FULL NINETY (90) DAY WARRANTY IN “RESIDENTIAL PLUS” APPLICATIONS:

 

Lynx

 products are designed and certified for residential use only. They are 

not intended for use in commercial applications. 

Lynx

 products should only be used in accordance to national and local codes. 

Lynx

 is not responsible 

for property damage or injury resulting from use in a commercial application. 

To support the manufacturing quality of its appliance’s 

Lynx

 will provide a 

full 90 day warranty for products used in “Residential Plus “applications. This “Residential Plus” warranty applies to applications where use of the product 

extends beyond residential use but is in compliance with national and local code. In some jurisdictions these applications are zoned as residential. 

Examples of, but not limited to, such applications covered by this warranty are bed and breakfasts, fire stations, private clubs, churches, condominium/

apartment common areas etc. Under this "Residential Plus" warranty, the product, its components and accessories are warranted to be free from 

defective material or workmanship for a period of ninety (90) days from the date of original retail purchase. 

Lynx

 warranter, agrees to repair or replace, at 

its option, any part which fails or is found to be defective during the warranty period. This warranty covers parts and labor. 

This warranty excludes use of 

the product in all commercial locations such as restaurants, food service locations and institutional food service locations.

  SIX YEAR FULL WARRANTY ON SEALED REFRIGERATION PARTS AS LISTED

 Any sealed refrigeration system component, as listed below, is warranted to be free from defective materials or workmanship in normal household use during the 

third through the sixth year from the date of original retail purchase. 

Lynx, 

warranter, agrees to repair or replace, at its option, any part which fails or is found to be 

defective during the warranty period.

Sealed Refrigeration System Components:

 Compressor, Evaporator, Condenser, Connecting Tubing, Dryer/Strainer

TWELVE YEAR LIMITED WARRANTY ON SEALED REFRIGERATION PARTS AS LISTED

Any sealed refrigeration system component, as listed above, which fails due to defective materials or workmanship in normal household use during the seventh 

through the twelfth year from the date of original retail purchase will be repaired or replaced, free of charge for the part itself, with the owner

 

paying all other costs, 

including labor.

WARRANTY TERMS

This warranty extends to the original retail purchaser of the product warranted hereunder and to each transferee owner of the product during the term of the 

original purchaser's warranty. the warranty is transferable by the original retail purchaser via home sale only. If a transferee owner is unable to provide proof of 

purchase from the original purchaser and the product has not been previously registered, the production date of the product, located in the serial number of the 

product, will serve as the effective warranty start date. 

The activation date of the warranty begins from the date of original retail purchase. In the case of new product purchase via building development sales, activation 

begins from the earlier date of either certificate of occupancy or 24 months from date of manufacture. Note date of manufacture is identified by serial tag on 

product. 

This warranty does not cover units purchased as b-stock, liquidation, salvage, seconds, refurbished, as-is, used products. 

This warranty shall apply to products purchased in the United States and Canada. Products must be purchased in the country where service is requested. Warranty 

service must be performed by a 

Lynx

 authorized service agency or representative. Warranty shall not apply to damage resulting from abuse, accident, natural 

disaster, loss of electrical power to the product for any reason, alteration, improper installation, improper operation, or repair service of the product by anyone 

other than a 

Lynx 

authorized service agency or representative. This warranty does not apply to commercial usage. Warrantor is not responsible for consequential or 

incidental damage whether arising out of breach of warranty, breach of contract or otherwise. Some jurisdictions do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitations do not apply to you.

Owner shall be responsible for proper installation, providing normal care and maintenance, providing proof of purchase upon request, and making the product 

reasonably accessible for service. If the product or one of its component parts contains a defect or malfunction during the warranty period, after a reasonable 

number of attempts by the warrantor to remedy the defects or malfunctions, the owner is entitled to either a refund or replacement, at the warrantor’s discretion of 

the product or its component part or parts. Warrantor’s liability on any claim of any kind, with respect to the goods or services covered hereunder, shall in no case 

exceed the price of the goods or service or part thereof which gives rise to the claim.

WARRANTY SERVICE

Under the terms of this warranty, service must be performed by a 

Lynx 

authorized service agent or representative. Service will be provided during normal business 

hours Labor performed at overtime or premium rates shall not be covered by the warranty. To obtain warranty service contact 

Lynx

 Customer Care at 

1-888-289-5969

. Please have model number, serial number, and date of original purchase available when calling. 

IMPORTANT:

 

R

etain proof of original purchase to 

establish warranty period. The return of the owner registration card is not a condition of warranty coverage. You should, however, return the owner registration card 

so

 Lynx

 can contact you should any question of safety arise which could affect you. Any implied warranties of merchantability and fitness applicable to the above 

described burner assemblies, infrared rotisserie burners, grill grates, and stainless steel parts are limited in duration to the period of coverage of the applicable 

express written limited warranties set forth above. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitations may 

not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may vary from jurisdiction to jurisdiction.

Specifications subject to change without notice.

2

7

WARRANTY

Summary of Contents for LN15ICER





























Reviews: