Error Codes
Error
Displayed Code
Error Description
Action to Take
Bin Sensor error
"OFF" will flash continuously in 1
second intervals in the display. No
audible alarm will sound.
Failed temperature sensor. Machine operation will imme-
diately enter an
OFF
state.
Call service to have the
temperature sensor replaced.
System Sensor error
"ICE" will flash continuously in
the display. No audible alarm will
sound.
Failed condenser temperature sensor. Machine opera-
tion will continue but ice production cycle will not adapt to
varying ambient conditions, so ice quality may vary.
Call service to have the
temperature sensor replaced.
Communication error Continual flashing of all indicators
on the display.
Loss of communication between the main board and the
user interface.
Call service to have a
diagnostic check.
Error codes:
The ice machine is monitored continuously. Any OPEN or
SHORTED circuit condition with a temperature sensor or
miscommunications between the control and user interface
will initiate an ERROR CODE as listed below:
16
CARE AND USE/INSTALLATION
Options menu:
Normal and ECO mode:
Your ice machine comes with an optional "ECO" mode.
This new feature allows you to tailor ice production to a
conservative rate, saving approximately 25% energy and
30% water from routine operation. While in this mode
ice production will slow and the appliance will use less
water and electricity. "ECO" mode should only be initiated
after there is a full bin of ice. To enter "ECO" mode do the
following:
• Press the "MENU" icon twice and the green
"ECO" will flash.
• Press and hold the "ON/OFF" icon until the
green "ECO" stops flashing and remains
illuminated.
• To return to the standard operating rate press the
"MENU" icon twice, the ECO will turn off and the
"ICE" will be flashing. Press and hold the "ON/
OFF" icon until the "ICE" stops flashing and
remains illuminated.
ICE
ECO
USING YOUR ELECTRONIC CONTROL
